ASME B18.21.1 304 Stainless Steel Black Oxide Flat Fender Washers

Flybear black oxide stainless steel fender washers combine a 304 stainless steel body with a large outside diameter and a blackened finish. These flat washers provide an extended bearing surface beneath a bolt head or nut, helping distribute clamping force across panels, brackets, covers, and other connected components.

The fender configuration is useful where a connection needs greater coverage around a clearance hole or slot. Its black appearance also coordinates with dark equipment housings, frames, and matching fasteners, making it suitable for visible assembly hardware.

Key Features of Black Oxide Stainless Steel Fender Washers

  • Large bearing footprint: Spreads clamping force across a wider region of the connected component.
  • Extended hole coverage: Provides additional overlap around oversized openings and suitable slotted mounting points.
  • 304 stainless steel: Offers corrosion resistance for many indoor and mild outdoor environments.
  • Black oxide finish: Complements black bolts, nuts, brackets, and equipment surfaces.
  • Simple flat construction: Fits beneath the fastener bearing face without a dedicated installation tool.

Product Specifications

ItemDescription
Product TypeFlat fender washer with a large outside diameter
Material304 stainless steel
Surface TreatmentBlack oxide
Dimensional ReferenceASME B18.21.1, fender washer configuration
Reference TableTable 13 in ASME B18.21.1-2009
Measurement SystemInch
Key DimensionsInside diameter, outside diameter, and thickness
Primary FunctionsLoad distribution, bearing support, and hole coverage
Inspection RequirementsAccording to the selected dimensions and agreed purchase specification

Wide Bearing Support Around the Fastening Point

A fender washer has a large outside diameter relative to its central opening. This geometry increases the area available to support the connected component beneath a bolt head or nut.

When the washer is sufficiently stiff and properly supported, the wider footprint helps reduce average bearing pressure. This can limit local indentation in materials that would otherwise experience concentrated pressure directly beneath the fastener.

The benefit depends on the complete connection. Washer thickness, material condition, clamp load, and the strength of the supported component all influence performance. A larger outside diameter should therefore be selected together with an appropriate thickness.

Hole Coverage and Contact Surface Protection

The extended outer edge provides greater overlap around a clearance hole and can cover suitable oversized holes or slots. This is useful for mounting arrangements where the fastener bearing face alone would provide insufficient coverage.

The washer also creates a separate bearing interface between the fastener and the component. This can help reduce direct indentation and localized wear during tightening, depending on the contact surfaces and installation conditions.

For slots and large openings, check the unsupported span beneath the washer. A washer that covers an opening may still bend under load. Where additional stiffness is required, the joint may need a thicker washer or a purpose-designed backing plate.

304 Stainless Steel Material

304 is an austenitic chromium-nickel stainless steel commonly used for industrial hardware. It provides a practical combination of corrosion resistance and formability for many equipment and general assembly applications.

Its corrosion resistance comes primarily from the stainless steel’s passive surface film. Indoor conditions and mild outdoor exposure are common service environments, while chloride contamination, aggressive chemicals, and persistent moisture require closer evaluation.

The washer-to-component interface should be considered during selection because moisture and contaminants can collect beneath a broad washer. Drainage, cleaning access, and compatibility with the connected materials help determine suitability.

The 304 designation identifies the material. Any required hardness or mechanical acceptance criteria should be specified separately.

Black Oxide Finish for a Consistent Appearance

The blackened finish helps exposed washers blend with dark panels, frames, and fasteners. Because a fender washer extends beyond the bolt head or nut, its appearance can be particularly noticeable on the finished assembly.

Shade, gloss, and surface cleanliness depend on the stainless steel blackening process and any protective post-treatment. For equipment with defined appearance requirements, an approved sample provides a useful reference for production acceptance.

The finish should also suit the assembly process. Include requirements for oily residue, handling marks, or surface transfer where these could affect adjacent components. Any specified corrosion-test performance should be supported by an agreed test method and acceptance criteria.

ASME B18.21.1 Size Selection

ASME B18.21.1 covers several washer configurations. Its plain washer section includes Type A, Type B, and fender washers, with separate dimensional tables. This product page addresses the fender configuration.

Specify all three dimensions when ordering: inside diameter, outside diameter, and thickness. The fastener’s nominal size alone does not fully identify the washer.

  • Inside diameter: Must provide suitable clearance around the bolt or screw and any adjacent radius.
  • Outside diameter: Must provide adequate coverage while clearing surrounding walls and components.
  • Thickness: Must suit the required bearing support, available space, and unsupported span.

Use the dimensional limits in the governing standard or approved drawing for inspection. A nominal size description should not replace the required tolerances.

Typical Applications

  • Equipment panels: Wider support around fastening points in covers, guards, and enclosure components.
  • Mounting brackets: Bearing coverage around clearance holes and approved slotted connections.
  • Display and signage assemblies: Visible hardware where a black finish complements the frame or panel.
  • Lightweight component assemblies: Connections where concentrated bearing pressure must be controlled.

For related washer configurations, explore Flybear’s stainless steel washers and retaining rings.

Installation and Quality Inspection

Place the washer at the bearing location shown on the assembly drawing. Confirm that it sits flat, clears nearby features, and receives adequate support from the connected component.

Inspect the contact area for debris, unacceptable burrs, or uneven surfaces before tightening. Follow the installation procedure for the complete joint, including the specified fastener, lubrication, and surface condition.

Procurement checks can include material identification, hole diameter, outside diameter, thickness, flatness, edge condition, and black finish appearance. Define any additional hardness testing or batch documentation before production. Review Flybear’s fastener quality inspection capabilities when preparing the acceptance requirements.

Frequently Asked Questions

Does a fender washer prevent loosening?

Its main functions are bearing support and load distribution. A plain fender washer does not provide a dedicated locking mechanism. Select a suitable locking arrangement separately when the connection requires it.

Will the washer prevent scratches on painted surfaces?

It separates the fastener bearing face from the component, but tightening can still mark paint or other coatings. Evaluate the contact arrangement where cosmetic protection is essential.

Can it be used with high-strength bolts?

Check the washer’s hardness, thickness, and resistance to deformation against the joint requirements. A 304 fender washer should not be assumed suitable for every highly preloaded connection.

Request a Quote for Black Oxide Fender Washers

Send Flybear the required inside diameter, outside diameter, thickness, quantity, and ASME reference or drawing. Include the mating fastener size, hole or slot dimensions, operating environment, and any finish or inspection requirements.

Contact Flybear for a quotation on ASME B18.21.1 304 stainless steel black oxide flat fender washers.

Follow Me!

youtubeInsta

Scroll to Top