DIN 7504M 304 Stainless Steel Black Oxide Cross Recessed Pan Head Self-Drilling Screws

Flybear DIN 7504M black self-drilling screws combine a 304 stainless steel body, a cross recessed pan head, a drilling point, and a black oxide finish. They are intended for assemblies requiring convenient screw installation, corrosion-resistant material, and a dark hardware appearance.

The drill point and tapping screw thread allow hole creation and fastening in a continuous operation when the selected screw is qualified for the substrate. Potential applications include aluminium profiles, thin aluminium panels, equipment covers, and mounting accessories, with drilling suitability confirmed for the actual material and thickness.

Key Features of DIN 7504M Black Self-Drilling Screws

  • 304 stainless steel: Provides corrosion resistance for many indoor and mild outdoor environments.
  • Self-drilling point: Can eliminate a separate pilot-drilling operation within the screw’s verified application range.
  • Tapping screw thread: Develops engagement directly in a suitable substrate without a separate nut.
  • Cross recessed pan head: Allows installation with a matching driver bit and seats on a flat component surface.
  • Black oxide finish: Coordinates with black panels, frames, brackets, and visible equipment hardware.

Product Specifications

ItemDescription
Product TypeCross recessed pan head self-drilling screw with tapping screw thread
Material304 stainless steel
Surface TreatmentBlack oxide
Head StylePan head
DriveCross recess; recess type and bit size according to the selected specification
Point StyleDrilling point
Dimensional ReferenceDIN 7504M; exact dimensions according to the specified edition or approved drawing
Related StandardISO 15481 for cross recessed pan head drilling screws with tapping screw thread
Diameter and LengthAccording to order requirements
Drilling CapacityConfirmed for the selected screw, substrate material, and thickness

Drilling and Fastening in One Installation Sequence

The drilling point creates an opening before the tapping screw thread engages the substrate. As installation continues, the thread develops the mating engagement and the head seats against the attached component.

For a qualified application, this sequence reduces separate drilling and tool-changing steps. It can also simplify installation where access is available from one side of the assembly.

Successful installation depends on matching the point geometry to the workpiece. The drill point needs sufficient clearance to complete penetration and discharge chips before full thread engagement. Screw length must accommodate the component stack, drilling point, and required effective thread engagement.

Pan Head and Cross Recessed Drive

The pan head has a rounded upper profile and a bearing underside that seats against the component surface without requiring a countersink. It is useful for covers, brackets, and panels where a projecting head is acceptable.

The cross recess provides access for axial driving with a suitable bit. Correct bit selection and alignment help maintain engagement and reduce recess damage during installation.

Check head diameter, head height, and tool access when selecting the screw. These dimensions matter near enclosure walls, inside narrow profiles, and wherever adjacent components limit installation clearance.

304 Stainless Steel and Substrate Compatibility

304 is an austenitic chromium-nickel stainless steel commonly used for corrosion-resistant industrial hardware. Its passive surface film supports performance in many ordinary atmospheric environments. Chloride exposure, trapped moisture, and aggressive cleaning chemicals should still be considered during material selection.

Drilling performance requires a separate assessment. Conventional 304 stainless steel does not gain the same drilling-point hardness through quench hardening as hardenable steels. Aluminium sheet and profiles are established application areas for suitably designed austenitic stainless steel drilling screws.

For drilling into steel or stainless steel, obtain confirmation of the actual point construction and tested capability. A 304 material designation or DIN 7504M reference alone does not establish suitability for those substrates.

Black Oxide Finish for Visible Fastening Points

The blackened surface complements dark equipment finishes and helps exposed screw heads blend with the surrounding assembly. This can be useful on instrument housings, aluminium frames, decorative covers, and other components where hardware remains visible.

Surface preparation, the stainless steel blackening process, and any protective post-treatment influence shade, gloss, cleanliness, and handling characteristics. An approved appearance sample can help define consistent expectations for repeat orders.

Black oxide does not increase drilling capacity or establish a corrosion-test rating. Specify any required salt spray performance, residue limit, or appearance criterion separately. The finish and any lubricant should also be considered when validating installation settings.

DIN 7504M and ISO 15481

DIN 7504M remains a familiar purchasing reference for this pan head drilling screw configuration. The corresponding successor product standard is ISO 15481, adopted as DIN EN ISO 15481.

When updating a drawing or approving an alternative, confirm the applicable dimensions, recess details, material requirements, and functional tests. Dimensional correspondence does not automatically establish the drilling performance of a particular stainless steel product.

Potential Applications

  • Aluminium window and door components: Fixing suitable profiles and accessories after verifying the alloy and wall thickness.
  • Equipment enclosures: Attaching aluminium covers and panels where a raised pan head is acceptable.
  • Automation accessories: Mounting lightweight brackets, guards, and identification plates to qualified substrates.
  • Display and instrument assemblies: Visible fastening points that benefit from a coordinated black finish.

Application approval should consider drilling performance, thread stripping, pull-out resistance, and head pull-through where relevant. Explore Flybear’s stainless steel tapping and drilling screws for related configurations.

Installation and Quality Verification

Use a correctly matched driver bit and hold the screw square to the workpiece. Establish driving speed, axial pressure, and seating torque through the approved installation procedure. Excessive speed or torque can damage the point, recess, substrate thread, or attached component.

For layered assemblies, provide the material and thickness of each layer, including any gaps. Total screw length, drilling capacity, and clamping thickness describe different requirements and should be checked separately.

Relevant quality checks include material identification, head and recess dimensions, thread geometry, point condition, and finish appearance. Functional trials should use representative substrates. Review Flybear’s fastener quality inspection capabilities and agree any drilling, torsional, or joint-load testing before production.

Frequently Asked Questions

Does this screw always eliminate pre-drilling?

It can eliminate pilot drilling when the screw is qualified for the substrate and thickness. The self-drilling description does not provide an unrestricted drilling rating.

Is the pan head suitable for flush installation?

The pan head remains above the component surface. Select a head configuration suited to the assembly’s clearance and appearance requirements.

Does this product provide a waterproof connection?

A pan head screw alone does not establish a watertight seal. Weather-exposed connections require an appropriate sealing arrangement and verification for the intended application.

Request a Quote for Your Assembly

Send Flybear the required diameter, length, quantity, drawing or standard reference, and black finish requirements. Include the substrate alloy, thickness of each layer, assembly arrangement, and any required installation or load-test criteria.

Contact Flybear for a quotation on DIN 7504M 304 stainless steel black oxide cross recessed pan head self-drilling screws.

Follow Me!

youtubeInsta

Scroll to Top